Pony

the bike shop
not the bar.
even though Sasha doesn't have a lot of stock
I can spend more time in there than in a BSC Superstore.
she's just got more betterer stuff.
it's not an attitude, or a clothes shop.
it's a bike shop with attitude.

Saint Cloud

took Bootsy's Cadex on a lovely ride yesterday through Hipster Central.
here it is outside Saint Cloud, a small clothes shop that sells bikes.
or is it a small bike shop that sells clothes?
or is it neither.
perhaps it's an attitude
or a state of mind.
or a moustache.

Giant TCR - the new "death fork"?

it seems "Giant", the most boring name in bikes, has been hit by a product recall.

apparently it affects the forks of the plastic bike in the pic above.

"Giant" showed they learned from Yamaha's mistake with the Viscount Aerospace aluminium fork.

they didn't tell anyone at all about the replacement program.

the US Consumer Product Safety Commission issued a recall in Jan 2009.

it pays to browse the CPSC and ACCC websites regularly for bicycle related product recalls.
it seems new bikes are more defective than you might think.
and if you think it's just cheap bikes that have defects, the bike in the pic retailed for around US$7,500.00.

other bikes currently under recall by the ACCC are from Avanti, Scott, Merida (another death fork! sheesh!), and the Surly Long-Haul Trucker.
ah Surly, for those too self-aware to buy a Giant.

Raleigh Stow-away clean-up

not a full resto,
just getting it cleaned up and seeing if it's worth spending time on.
it's pretty rusty and neglected as you will see.

new brake cables and the Weinmann 810s from the Gitane.
810 I realised refers to the reach, i.e. the 810s are longer reach than the 730s.
I'm smart.

the only 1/8 chain I had was a half-link chain.

original steel wheels

kooky high BB position and short wheelbase

hey! I've seen those brake levers before!

learning about SA hubs...

like one of those "magic-eye" pics from years ago.

so will it be worth spending more time on?
probably not.
it was pretty neglected.
but when the Gitane ha returned to its owner
this will make a good bike to tootle down the shops on.

Victor goes to the big city

Victor went the big smoke last week. 

first stop was the university, where he had to rub shoulders with some insouciant fixies, naturally.

then he marveled at the variety of bikes he saw.

he never knew there were so many kinds

or so many customisations.

he thought that all these bikes must belong to giants.

everywhere he looked, bikes had unnaturally thick wheels.

he started to feel inadequate.

and hubs...

finally he found some bikes he could relate to.

it was scary being locked up in strange environs

but when he got home he realised how much he had learned about the world outside

and he was grateful to his owner for taking him somewhere new.

Stop press - Gitane finished... again

can't believe after 25 years I managed to find her chainguard...

amazing.

birthday bike

the boy received this for his birthday.

it's a bit big for him yet.

bmx frame geometry is much more adult oriented these days.

but it's a pretty sweet rideTM and I think he's happy with it.

at least it doesn't have a manufacturer's sticker on it that says:

"this bike is not designed for tricks, stunts or off-road use."

birthday

path racer bars - cont'd

here are the Nitto dove bars

and here are the original steel ladies' tourers
(slipper-shod foot pictured)
slightly wider across the top and with less of a forward bend.

here's the comparison.
time and test rides will tell which will become the favoured bar
on the new Sport.

Gitane finished

mostly.

I had to replace the original steel wheels which were warped.

but 55cm diameter rims are hard to find.

the more common size is 52cm, which is the 24" mountain bike standard.

so I had to find some extra-long reach (i.e. 100mm) brake calipers.

these Taiwanese steel jobbies from Ephraim in Brunswick were just the ticket.

I miss the white-wall tyres the bike came with, and the grey wheelchair tyres which were their replacement

(MTB don't do girly tyres)

but this is outweighed by having alloy wheels

that are straight.

these Dia-Compe red dot rip-offs are by Cherry Japan and are, of course, NOS!

sparkly handgrips help to offset the macho black tyres.

here's the final look. 

compare it to a slightly more original version of the same bike

here at the little bike blog.

new shoes

these NOS! shoes from the 70s are exactly what I've been looking for:

stiff soles but cleatless. 

lightweight.

cheap

and stylish.

maybe VeloOrange could remake them?

and a shot of the sole, with molded ridges to catch onto your pedal

actually, these soles get a little slippery in the wet (which we've had a lot of lately)

and my feet would have slipped sideways off the pedals if I wasn't using toe-straps.

group ride despoiled by rain

at least my co-riders were without testosterone poisoning,
and we finished with a nice hot chocolate.

Malvern Star Coronation

this great frame sold on the bay recently.

I don't think it even needs wheels.

now I finally have a tattoo

and the boy has one too.

Oji-san's helmet

what every well-dressed Japanese retiree is wearing this summer.

strangely, made in Denmark by "Yakkay".

if Victoria's helmet laws weren't so draconian I could import one.

Victor

this bike doesn't just fly, it sings.
for those who are new to this blog, this is the older, commuter brother of my original bike
which is still in the paint shop...
new Campag 144 BCD 53 tooth 3/32 chainring.
all the old steel parts (rims, crankset) have been replaced with aluminium alloy
to free the frame's potential.
it's now a fully-actualised, completely-evolved
bicycle.
click for supermassive wall poster for your bedroom.

Raleigh "Stow-Away" folder

bought this for $25.

it'll be a bit of work, but it's got a Sturmey-Archer (British made) 3 speed hub

and lovely embossing on the seat stays.

fave tools - repair stand

this is going to change my life

new wheel for Victor

when I got Victor he had nasty steel rims but lovely hubs.

I vowed to do something about it.

finally got the front wheel done.

front and rear laced onto a nice pair of 27" Rigida rims

albeit single wall. 

but then they only cost me $30ish

and they are straight and have a lovely profile that fits the era.

none of that deep V shit thankyouverymuch.

nicely done at my lbs run by the very decent Sean.

even if he does trade in mostly crabon stuff.